RIGI Premium Inline Joiner (Small)

• Friction fit clamp – no holes needed in your glass
• Braces two straight glass panels together for a rigid, connected fence
• Especially recommended in exposed or high-wind areas
• Ideal for panel gaps of 20–35mm (40mm absolute max)
• Made from quality 316 stainless steel
• Suits 12mm glass panels

If your frameless glass panels feel like they move a little too much in the wind – or the kids play rough with the fence, forever jumping and leaning against it – this is the fix. The small inline joiner is one of the most popular frameless pool glass brackets we sell. It sits across the gap between two straight 12mm panels and braces them together, so the run feels solid and connected instead of flexing panel by panel.

It is a friction fit clamp, so no holes are needed in your glass for fitment. A single central hex-head screw draws the two halves of the bracket together, clamping directly onto both faces of the glass – each half is full thickness with a rubber lining that grips securely without damage. That makes it perfect for new installs and for retrofitting to an existing fence, provided your panel gaps suit. Once on, it shows just a clean 25mm profile.

As Fence Guru, we supply the original RIGI clamp – a premium finish appropriate to a professional-quality frameless glass pool fence, not a lesser imitation.

Fence Guru tip – getting the gap right: This clamp is 75mm long, and that length is shared between the gap and the grip it takes on each panel. The wider the gap, the less steel is left holding the glass. We recommend sticking to 20–35mm gaps (40mm absolute maximum) so you keep at least 20mm of solid grip on each side. For wider gaps, step up to our Large Inline Joiner.

Good to know: all RIGI clamps are fully reversible, so the clamp can be flipped to suit whichever way your clamp needs to sit.

A note on tightening: As with spigots and other friction fit glass hardware, tighten firmly but do not overtighten.

RIGI clamps brace panels together beautifully, but they are an accessory, not a substitute for correct installation. Your panels still need proper spigots and a sound base.

Availability: Part of our range stocked across 8 Aus-wide warehouses for collection: Brisbane (Virginia), Ipswich (Bundamba – opening soon), Gold Coast (Molendinar), Newcastle (Cardiff), Melbourne (Derrimut & Dandenong), Adelaide (Kilburn) and Perth (Jandakot). If you are not collecting your main order from one of these locations, please order your RIGI clamps as a separate order and select the “Boxed Item Pack & Send” shipping option at checkout.

RIGI Clamp Gap Chart

All RIGI clamps suit 12mm glass and are typically installed 100mm below the top of the glass fence. Gap = the space between the two glass panels (or glass and wall/post). Stay within our recommended range for a professional, strong and best-looking result.