Very-Clear™ Pool Glass
RIGI Premium Adjustable Joiner (use also as a Large 90 Degree Joiner)
- Availability:
- In Stock
- Pick-up, Shipping or Packing:
- Calculated at Checkout
- NEED AN ASAP PICKUP? (M-F 8-3 AEST):
- Note ideal latest time in Order Notes & Text 0412 736 242. We'll aim to meet it!
- ASAP IN-STOCK GUARANTEE:
- If it's not all in stock, you may cancel for a full refund
- Stocked At:
- Bris (Virginia), Ipswich (Bundamba), G-Coast (Molendinar), N-castle (Cardiff), Melb (Derrimut & Dandenong), Adelaide (Kilburn), Perth (Jandakot). Not collecting here? Order separately; select 'Boxed Item Pack & Send'
- CLICK & COLLECT (FREE):
- Order now, pick up within 30 days. Ready-to-collect notice in 1–3 days
- DIRECT DELIVERY ($159-$229):
- In 3-10 days in the stocking warehouse delivery zone
Description
- Friction fit clamp – no holes needed in your glass
- Adjusts from 90 to 180 degrees for angled and variable installs
- Great solution for angled runs, angled landscaping and 135 degree corners
- Can also be used as a large 90 degree joiner
- Made from quality 316 stainless steel
- Suits 12mm glass panels
- PLEASE NOTE: only adjusts from 90 to 180 degrees
Not every fence runs in straight lines and tidy 90 degree corners. When your layout has an odd angle – an angled run, an angled garden bed, a 135 degree corner – this is the bracket that solves it. An internal heavy-duty pivot lets the two steel arms rotate anywhere from 90 degrees right through to 180 degrees, so it adapts to your angle instead of forcing you to redesign. It can also double as a large 90 degree joiner.
Same no-drill friction fit as the rest of our frameless pool glass brackets: grub screws drive an internal pressure plate with rubber against the glass, with the same clean 25mm height. One bracket, almost any angle.
As Fence Guru, we supply the original RIGI clamp – a premium finish appropriate to a professional-quality frameless glass pool fence.
Fence Guru tip – your gap depends on the angle: Used as a 90 degree corner, the arms fold to a square footprint and each side needs a gap of 32mm minimum (so the pivot hardware fits) up to 60mm maximum (to stay tight and pool-compliant). Used straight, on a slight angle, or as a 135 degree corner, the arms open out and the recommended gap is 55mm to 90mm.
Good to know: all RIGI clamps are fully reversible, so the clamp can be flipped to suit whichever way your clamp needs to sit.
A note on tightening: As with spigots and other friction fit glass hardware, tighten firmly but do not overtighten.
Availability: Part of our range stocked across 8 Aus-wide warehouses for collection: Brisbane (Virginia), Ipswich (Bundamba – opening soon), Gold Coast (Molendinar), Newcastle (Cardiff), Melbourne (Derrimut & Dandenong), Adelaide (Kilburn) and Perth (Jandakot). If you are not collecting your main order from one of these locations, please order your RIGI clamps as a separate order and select the “Boxed Item Pack & Send” shipping option at checkout.
RIGI Clamp Gap Chart
| RIGI Clamp Option | Bracket Length | Recommended Gaps |
|---|---|---|
| Inline – Small | 75mm | 20–35mm (40mm max) |
| Inline – Large | 140mm | 20–60mm (90mm max) |
| 90 Degree Corner | 72mm × 45mm | 20–35mm (gap on 72mm side only) |
| Adjustable – set at 90° (large corner) | 102 × 102mm | 32–60mm (per side, measure from outside glass line) |
| Adjustable – straight, angled, 135° | 180mm | 55–90mm |
| Wall Mount – Inline Fix | 80mm | 20–60mm |
| Wall Mount – Offset / Side Fix | 70mm | 20–50mm |
All RIGI clamps suit 12mm glass and are typically installed 100mm below the top of the glass fence. Gap = the space between the two glass panels (or glass and wall/post). Stay within our recommended range for a professional, strong and best-looking result.
Stainless steel maintenance:
Clean stainless steel regularly using a mild detergent and a soft brush to remove the build up of dirt, grime and salt deposits etc. Wash with a mild detergent and then rinse off with fresh water. Do not use heavy duty cleaners or strong household cleaner or solvents. Never use hydrochloric acid to clean stainless steel or cleaners that are acidic or alcohol based. Please note: if you are in a highly corrosive environment and choose not to regularly clean your stainless steel components you may get tea staining/discolouration on your stainless steel products.
Warranty Information
Related Products
Related Products
RIGI Premium Wall Mounted Joiner - Side Fix
Very-Clear™ Pool Glass
RIGI Premium 90 Degree Joiner
Very-Clear™ Pool Glass
RIGI Premium Inline Joiner (Large)
Very-Clear™ Pool Glass
RIGI Premium Wall Mounted Joiner
Very-Clear™ Pool Glass
