RIGI Premium Inline Joiner (Large)

• Friction fit clamp – no holes needed in your glass
• Braces two straight glass panels with extra grip for wider gaps and long runs
• Especially recommended in exposed or high-wind areas
• Ideal for panel gaps of 20–90mm (recommended working range 20–60mm)
• Made from quality 316 stainless steel
• Suits 12mm glass panels

Same job as the small inline joiner, but longer – to span bigger gaps and built for the situations that demand more grip. This is one of the strongest frameless pool glass brackets in the range. The large inline joiner stretches further across the gap, giving far more metal-on-glass contact. It is especially recommended in exposed or high-wind areas, and on long runs, retaining-wall panels, and glass over timber decking where there is natural flex in the structure.

It uses the same no-drill friction fit, tightened with a single central hex-head screw that draws the two bracket halves together onto the glass – each half full thickness with a rubber lining, no drilling and no damage. You still get the clean 25mm height, just with a lot more holding power behind it.

As Fence Guru, we supply the original RIGI clamp – a premium finish appropriate to a professional-quality frameless glass pool fence.

Fence Guru tip – length and gaps: This clamp comfortably handles gaps from 20mm up to 90mm while still keeping a solid bite on both panels. That said, while it accommodates the wider end, our recommended working range is 20–60mm. For a clean, professional look, try to keep your gaps within that range – wider gaps are structurally fine but start to look stretched.

Good to know: all RIGI clamps are fully reversible, so the clamp can be flipped to suit whichever way your clamp needs to sit.

A note on tightening: As with spigots and other friction fit glass hardware, tighten firmly but do not overtighten.

Availability: Part of our range stocked across 8 Aus-wide warehouses for collection: Brisbane (Virginia), Ipswich (Bundamba – opening soon), Gold Coast (Molendinar), Newcastle (Cardiff), Melbourne (Derrimut & Dandenong), Adelaide (Kilburn) and Perth (Jandakot). If you are not collecting your main order from one of these locations, please order your RIGI clamps as a separate order and select the “Boxed Item Pack & Send” shipping option at checkout.

RIGI Clamp Gap Chart

All RIGI clamps suit 12mm glass and are typically installed 100mm below the top of the glass fence. Gap = the space between the two glass panels (or glass and wall/post). Stay within our recommended range for a professional, strong and best-looking result.