Very-Clear™ Pool Glass
RIGI Premium Wall Mounted Joiner
- Availability:
- In Stock
- Pick-up, Shipping or Packing:
- Calculated at Checkout
- NEED AN ASAP PICKUP? (M-F 8-3 AEST):
- Note ideal latest time in Order Notes & Text 0412 736 242. We'll aim to meet it!
- ASAP IN-STOCK GUARANTEE:
- If it's not all in stock, you may cancel for a full refund
- Stocked At:
- Bris (Virginia), Ipswich (Bundamba), G-Coast (Molendinar), N-castle (Cardiff), Melb (Derrimut & Dandenong), Adelaide (Kilburn), Perth (Jandakot). Not collecting here? Order separately; select 'Boxed Item Pack & Send'
- CLICK & COLLECT (FREE):
- Order now, pick up within 30 days. Ready-to-collect notice in 1–3 days
- DIRECT DELIVERY ($159-$229):
- In 3-10 days in the stocking warehouse delivery zone
Description
- Friction fit clamp – no holes needed in your glass
- Braces glass to a wall or post at the end of a run
- Ideal for tall retaining-wall panels needing extra support
- 2 countersunk fixing holes**
- Made from quality 316 stainless steel
- Suits 12mm glass panels
Every glass fence run has to end somewhere – usually against a house wall, a brick pillar, or a solid post. This wall mounted joiner is the frameless pool glass bracket for that job: it anchors the end panel firmly to the structure, bracing it so it stays steady instead of standing free and moving on its own. It is also the go-to for tall retaining-wall panels that want extra support from a nearby wall.
It screws face-on into the flat structure, while gripping your glass with the same no-drill friction fit – grub screws driving an internal pressure plate with rubber against the panel.
As Fence Guru, we supply the original RIGI clamp – a premium finish appropriate to a professional-quality frameless glass pool fence. One thing worth knowing: unlike the glass-to-glass clamps, a wall clamp’s fixing position is more permanent because it is screwed into the wall, so plan its placement before you drill.
Fence Guru tip: Allow 20mm to 60mm between the wall face and your glass panel so the hardware secures a firm, lasting grip.
Good to know: all RIGI clamps are fully reversible, so the clamp can be flipped to suit whichever way your clamp needs to sit.
A note on tightening: As with spigots and other friction fit glass hardware, tighten firmly but do not overtighten.
**Available in Brisbane, Gold Coast, Newcastle, Melbourne, Adelaide and Perth but not stocked at every warehouse.
Availability: Part of our range stocked across 8 Aus-wide warehouses for collection: Brisbane (Virginia), Ipswich (Bundamba – opening soon), Gold Coast (Molendinar), Newcastle (Cardiff), Melbourne (Derrimut & Dandenong), Adelaide (Kilburn) and Perth (Jandakot). If you are not collecting your main order from one of these locations, please order your RIGI clamps as a separate order and select the “Boxed Item Pack & Send” shipping option at checkout.
RIGI Clamp Gap Chart
| RIGI Clamp Option | Bracket Length | Recommended Gaps |
|---|---|---|
| Inline – Small | 75mm | 20–35mm (40mm max) |
| Inline – Large | 140mm | 20–60mm (90mm max) |
| 90 Degree Corner | 72mm × 45mm | 20–35mm (gap on 72mm side only) |
| Adjustable – set at 90° (large corner) | 102 × 102mm | 32–60mm (per side, measure from outside glass line) |
| Adjustable – straight, angled, 135° | 180mm | 55–90mm |
| Wall Mount – Inline Fix | 80mm | 20–60mm |
| Wall Mount – Offset / Side Fix | 70mm | 20–50mm |
All RIGI clamps suit 12mm glass and are typically installed 100mm below the top of the glass fence. Gap = the space between the two glass panels (or glass and wall/post). Stay within our recommended range for a professional, strong and best-looking result.
Stainless steel maintenance:
Clean stainless steel regularly using a mild detergent and a soft brush to remove the build up of dirt, grime and salt deposits etc. Wash with a mild detergent and then rinse off with fresh water. Do not use heavy duty cleaners or strong household cleaner or solvents. Never use hydrochloric acid to clean stainless steel or cleaners that are acidic or alcohol based. Please note: if you are in a highly corrosive environment and choose not to regularly clean your stainless steel components you may get tea staining/discolouration on your stainless steel products.
Warranty Information
Related Products
Related Products
RIGI Premium Wall Mounted Joiner - Side Fix
Very-Clear™ Pool Glass
RIGI Premium 90 Degree Joiner
Very-Clear™ Pool Glass
RIGI Premium Inline Joiner (Large)
Very-Clear™ Pool Glass
RIGI Premium Wall Mounted Joiner
Very-Clear™ Pool Glass
