RIGI Premium 90 Degree Joiner

• Friction fit clamp – no holes needed in your glass
• Braces glass panels square at a fixed 90 degree corner
• Keeps pool corners tight and rattle-free under wind load
• Recommended panel gap 20–35mm
• Made from quality 316 stainless steel
• Suits 12mm glass panels

Pool corners are where frameless glass fences are most likely to wobble – two panels meeting at 90 degrees with nothing tying them together will each move on their own. This 90 degree corner joiner is one of the most useful frameless pool glass brackets for exactly that situation. It clamps both panels at the bend and holds the corner perfectly square, so it stays tight and rattle-free even under wind load.

Like the rest of the range, it is friction fit – no holes needed in your glass for fitment. The grub screws drive an internal pressure plate with rubber against both panels for a firm, damage-free grip, finished in the same low 25mm profile so it sits neatly on the line.

As Fence Guru, we supply the original RIGI clamp – a premium finish appropriate to a professional-quality frameless glass pool fence. Because it is friction fit, placement is forgiving: in the rare case an inspector wants it moved, it usually shifts quickly and easily with no holes left behind.

A quick note on the gap: this corner clamp has a longer 72mm arm and a shorter 45mm arm, and the panel gap is measured on the 72mm side. Do not worry about which way that falls on your layout – all RIGI clamps are fully reversible, so if your gap needs to sit on the other side you simply flip the clamp to suit.

Fence Guru tip: Keep your corner gap tight, between 20mm and 35mm. That gives the arms a deep, secure grip on both panels and keeps the corner locked square and movement-free.

A note on tightening: As with spigots and other friction fit glass hardware, tighten firmly but do not overtighten.

Availability: Part of our range stocked across 8 Aus-wide warehouses for collection: Brisbane (Virginia), Ipswich (Bundamba – opening soon), Gold Coast (Molendinar), Newcastle (Cardiff), Melbourne (Derrimut & Dandenong), Adelaide (Kilburn) and Perth (Jandakot). If you are not collecting your main order from one of these locations, please order your RIGI clamps as a separate order and select the “Boxed Item Pack & Send” shipping option at checkout.

RIGI Clamp Gap Chart

All RIGI clamps suit 12mm glass and are typically installed 100mm below the top of the glass fence. Gap = the space between the two glass panels (or glass and wall/post). Stay within our recommended range for a professional, strong and best-looking result.