Extra Wide Security Gate - 2.45m wide x 1.8m high

2.45m wide Security Gate - suits a 1.8m high Security Fence

• 2450mm wide x 1.8m high security gate to match security fence panels.  
• Use 2 x gates to make a double gate. (Would suit a double gate opening of approx 4960mm)
• Use 1 x 2450mm gate with a 975mm single gate for an opening of approx 3485mm)
• This is the only pre-made extra wide gate that we offer.
• Please note: If you need to make a smaller size gates... buy a panel and cut to size. (or buy this gate and cut down) Then weld 40x40mm or 50x50mm square galvanized steel at each end. 

Please Note: Extra wide gate is only available in Brisbane, Gold Coast, Melbourne and Adelaide. (Not available Sydney and Perth).

Possible Double Gate Openings:

2 x 975mm gates, with 60mm allowance for hinges and latch gaps = 2010mm opening/gap between gate posts.

1 x 975mm gates, 1 x 2450mm gate, with 60mm allowance for hinges and latch gaps = 3485mm opening/gap between gate posts.

2 x 2450mm gates, with 60mm allowance for hinges and latch gaps = 4960mm opening/gap between gate posts.